Alucoworld ▎What’s aluminum plastic composite panel?

previous arrow
next arrow

1.The definition of aluminum plastic composite panel acm panels

Aluminum plastic composite panel, it's abbreviation is acp panel. The surface of the aluminum-plastic panel is a decorative surface composed of a coating or a film. The function is to decorate or protect the panel. The inside is a composite sheet of two layers and the middle is a core layer. The core layer is composed of plastic.

2.The Classification of aluminum plastic composite panels

Aluminum plastic plates are classified by use:

• Aluminum plastic composite panels for building curtain wall

The minimum thickness of the upper and lower aluminum plates is not less than 0.50 mm.
The total thickness should not be less than 4 mm.
The coating shall be coated with fluorocarbon resin.

• Aluminum plastic composite panels for exterior wall and ADs

The upper and lower aluminum plates shall be made of rust-proof aluminum with a thickness of not less than 0.20mm. The total thickness shall not be less than 4mm.
The coating is generally a fluorocarbon coating or a polyester coating.

• Aluminum plastic composite panels  for interior

The thickness of upper and lower aluminum plates is generally 0.20mm, and the minimum thickness is not less than 0.10mm, and the total thickness is generally 3mm.
The coating is coated with polyester or acrylic.

Aluminium plastic composite panels are classified according to product functions:

• Fireproof aluminium plastic composite panel

Flame retardant core material is selected, and the combustion performance of the product reaches the refractory level (B1 level) or non-combustible level (A level);
At the same time, other performance indicators must also meet the technical specifications of aluminum plastic plates.

• Antibacterial and mould-resistant ACP

The coating with antibacterial and bactericidal effects is coated on the aluminum plastic board, so that it has the function of controlling the propagation of microorganisms and ultimately killing the bacteria.

• Anti-static aluminum composite panels

The anti-static aluminum-plastic board adopts anti-static coating, and the surface resistivity is less than 109, which is lower than the surface resistivity of ordinary aluminum-plastic board. Therefore, it is not easy to generate static electricity and dust in the air is not easily attached to the surface.

Aluminium plastic composite panel is classified by surface decoration effect:

• Brushed aluminum composite panel

The aluminium alloy panel’s surface is treated with brushed silk processing, and the common products are gold and silver wire drawing , which bring people different visual enjoyment.



 Mirror aluminium plastic composite panels

The surface of the aluminum alloy panel is polished to look like a mirror.

• Coating decorative aluminium plastic composite panels

Various decorative coatings are applied to the surface of aluminum plates. The coatings commonly used are   fluorocarbon, polyester, acrylic coating, including metal color, plain color, pearl color, fluorescent color and other colors, with a decorative effect, which are the most common species in the market.

• Oxidized and colored aluminum plastic composite panel

Anodic oxidation is adopted to deal with aluminum alloy panels timely, which can make panels be rose red, bronze and other unique colors to play a special decorative effect.

• Laminated decorative composite panel

That is, the color film according to the set technological conditions, relys on the role of adhesives to make the color pattern film adhere on the primed aluminum plate or directly on the degreased aluminum plate. The main varieties are marble color panel and wood color panel, etc.

• Color printed aluminum plastic composite panel

Different patterns will be printed on the transfer paper with various imitation natural patterns through advanced computer photo printing technology, and then various imitation natural patterns are indirectly reproduced on the aluminum-plastic composite board by thermal transfer technology. It can meet the designer's creativity and the owner's personalized choice.

3.Technical parameters of aluminum plastic panels:

(1) Total thickness of alucobondpanel

The total thickness of the aluminum-plastic panel is 2--6mm, and the thickness of the aluminum-plastic panel of the curtain wall is less than 4mm. Generally, the thickness of

(2) Alucobond panel sizes

The standard size is 1220*2440mm, width is 1000--2000mm, length is 1000--6000mm, and special specifications are negotiated.

(3) Panel of aluminium plastic composite panel

The material is 3003 aluminum-manganese alloy, thickness is greater than or equal to 0.5mm (national standard for curtain wall aluminum-plastic composite panel), other thicknesses are customized according to customer requirements.

(4) The core material of aluminium plastic composite panel

High pressure low density polyethylene, Class B fireproof core.

(5) The requirements for the backplane and panel of aluminum plastic composite panel are the same

(6) The adhesive for the aluminum plastic composite panel is polymer film.

(7) Surface treatment of aluminum plastic composite panel.

(8) The color of aluminum plastic composite panel

The colors of aluminum-plastic panel are plain, metallic, pearlescent, drawing, etc. It can also be customized according to customer's color.

(9) Fireproof performance of aluminum-plastic panels.

The fire-resistance of aluminum-plastic panel is Grade B or Grade A(GB8624-2012).

4.Characteristics of aluminum plastic sheet

(1)EconomyThe product uses all kinds of high quality coating, does not need long-term maintenance, avoids the maintenance cost of high-rise large buildings.The urban pollution in China is serious. After a few years of use, it needs to be maintained and cleaned. Because of its good self-cleaning properties, only neutral detergents and fresh water are needed. After cleaning, the plates are permanently new.
(2)DurabilityFluorocarbon-coated aluminum-plastic panel has the characteristics of durability, weather resistance, high temperature resistance, abrasion resistance, and pollution resistance and so on.
(3)Light weightAluminium-plastic plate is made of aluminum alloy and high-quality plastic. It is lighter than other decorative materials, reduces the weight burden on the material, facilitates construction, and greatly shortens the construction period.
(4)Easy constructionThe aluminum plastic plate is easy to cut, cut, gouge, bend into arc, right Angle and other shapes, which can fully cooperate with decoration and design various shape changes.
(5)Fire resistanceThe outer aluminum foil of the aluminum-plastic panel can protect the polyethylene core material, and can prevent heat conduction during the early stage of combustion, and the fire-resistance meets international standards.
(6)DesignAluminium-plastic panels can produce distinctive colors and shapes according to customers' requirements. They can satisfy designers' unique designs and achieve perfect decorative effects.
(7)Environment protectionThere is no change in the surface layer and no pollution to the environment.
(8)Rich colorsThere are hundreds of colors for customers to choose from.
(9)High intensityThe high strength of high quality aluminum panel greatly enhances the strength of aluminum plastic panel, and ensures the effect of anti-wind pressure, anti-shock, anti-leakage, anti-lightning and anti-impact of curtain wall.
(10)FlatnesThe aluminum plastic plate provides excellent flat surface and satisfies the modern architecture's pursuit of high visual sense

5.Application of aluminium plastic composite panel

(1) External walls and curtain walls of the building.

(2) Exterior wall modification and renovation of the old building.

(3) Interior decoration of buildings and homes, such as: ceilings, partitions, various cabinets, bar tables, video walls, door and window jackets, and skirtings.

(4) All kinds of Kanban, billboards, sign boards,  publicity boards.

(5) Industrial materials, trains, ships, insulated van bodies.

(6) Used for decoration in places with high humidity (bathroom inner wall).

6.Alucoworld aluminium plastic composite panels

As a pioneer in domestic aluminum plastic board industry, Alucoworld  has been focusing on external wall polyvinylidene fluoride coating aluminium composite plate and inner wall aluminium composite plate for 15 years. Our top quality and attractive enough price make our products export to ASEAN, South Asia, central Asia, South Africa, eastern Europe and Russia, Argentina, Japan, India, Singapore and other regions and countries and enjoy international reputation.

We are proud to be the owner of our business and know all the details of aluminium composite plates. We are willing to do our best to provide the best service and products to every customer.

Mail to: [email protected]

    How many squares do you need?
    Do you want to import from china ?
    Why do you contact us?
    Direct purchaseFor market study

    Want to Know more about us? Click here!
    What to know about alucobond price? Click here!